DHCP

Quick Config Setup Guide

Hypervisor: 

DHCP

At this point, you need to choose one of the following options:

  • The environment needs a DHCP server: if no DHCP server is available, you can create one with this option. The primary DNS in most cases will be one of the IP addresses of the AD Integration section.
  • The environment does not need a DHCP server: select this option if a DHCP is available and there is no need to create another one.

If there is an existing DHCP server available, you can configure it in this section.

Clicking on disabled, the Quick Config Setup will configure a new DHCP server.

Remember: DHCP is not enabled for Full Integration Deployments.

Next, you can go to the Confirmation section.

Was this article helpful?